Time relay RVC-1M in an ultra thin 13mm case!

Реле времени циклическое РВЦ-1М
RVC-1M ACDC24V/АС230V UHL2
2040.00 руб. с НДС

RVC-1M ACDC24V/АС230V UHL4
1700.00 руб. с НДС

 

  • Cyclic relay time with separate adjustment of pulse and pause times
  • Time delay range from 1s to 30h
  • Setting time delays by using two turning decade switches
  • 4 operation diagrams
  • 1 switching group of contacts 5A/250V
  • The status indicator built-in relay, indicator of availability of power
  • Width of the case is 13mm
 
PURPOSE OF THE RELAY
 Time relay RVC-1M is designed for switching electric circuits in a cyclic mode with preset time delay (pause and pulse).
        
DESIGN OF THE RELAY
 Relay is produced in a plastic case with a unified front connection wires power and switched circuits. Mounting is carried out on a DIN rail  width 35mm (GOST R IEC 60715-2003) or on a smooth surface. To set on a smooth surface, you need to push locks. Terminal design provides robust clamp wires up to 2,5mm2. On the front panel there are: rotary switch to set time delay pause "tpause", rotary switch to set the time delay pulse time "tpulse", yellow indicator operation built-in relay "", green indicator of turning on powering «U». On the side surface is located DIP-switch to select the pause time range (1, 2, 3 switches), the pulse time range (4, 5, 6 switches) and the operation diagrams (7, 8 switches).
                                                                                            
OPERATION OF THE RELAY
 The relay has 8 sub-bands delay pause time and 8 sub-bands pulse delay time. The required pause delay is set by rotary switch "tpause" in recalculation at range of time that selected by DIP- switch. The required pulse delay is set by rotary switch "tpulse" in recalculation at range of time that selected by DIP-switch.
 Relay operation digram is set by using DIP-switch.

 WARNING:  Changing the operation diagrams and multipliers is possible only after removal of the voltage.
 In the currentless position the contacts 15-16 are closed. After the supplying voltage lights up green LED «U», relay begins to work the selected diagram, during the reference set time the green «U» indicator light flashes. When the built-in relay is turned on the yellow LED «» lights and the contacts 15-18 are closed..
 
SPECIFICATION OF THE RELAY RVC-1M
A parameter
Unit
RVC-1M
Supply voltage
В
АСDC24/AC230
Range of the delays time pulse and pause
 
1-10s, 3-30s, 10-100s, 1-10min, 3-30min, 10-100min, 1-
10h, 3-30h
Deviation of installation time delay, not more
%
10
Deviation of counting time delay, not more
%
2
Repeated availability time, not more
s
0,1
Exposure time control signal, not less
s
0,05
Operating diagrams
 
7, 8, 9 и 10
Maximum switching current: AC250V 50Hz (AC1)/DC30V (DC1)
A
5
Maximum voltage
V
400
Maximum switching power: АС250V 50Hz (АС1)/DC30V (DC1)
VA/W
1250/150
The maximum voltage between the power supply circuits and relay contacts
V
AC2000 (50Hz - 1min)
Power consumption, max
VA
2
Mechanical endurance, not less
cycles
10х106
Electrical endurance, not less
cycles
100000
Quantity and type of contacts
 
1 switching group
Operating temperature range (different versions)
0C
-25…+55 (UHL4)
-40…+55 (UHL2)
Storage temperature
0C
-40 ... +70
Immunity to interference from bursts in accordance with GOST R 51317.4.4-99 (IEC/EN 61000-4-4)
 
level 3 (2kV/5kHz)
Immunity to interference over voltage in accordance with GOST R 51317.4.5-99 (IEC/EN 61000-4-5)
 
level 3 (2kV A1-A2)
Climatic modification and placement category by GOST 15150-69 (non-condensing)
 
UHL4 и UHL2
The degree's protection at case/terminals according to by GOST 14254-96
 
IP40/IP20
The degree of pollution in accordance with GOST 9920-89
 
2
Relative humidity of air
%
up to 80 (at 250С)
Height above sea level
m
till 2000 
Operating position in space
 
artbitrary
Mode
 
round the clock
Dimensions
mm
13х93х62
Weight
kg
0,065
 
DIAGRAMS OF OPERATING THE RELAY
Диаграмма работы реле времени № 7
 Cyclical switching on and off the relay (infinite loop). When the supply voltage begins count delay time tpause, after working time, pauses, the output relay is turned on and begins count time delay tpulse, after working the output relay pulse time off. The cycle is repeated before removal of voltage.
Диаграмма работы реле времени № 8
 Cyclical switching on and off the relay (infinite loop). When the supply voltage, the output relay is turned on and begins count time delay tpulse, after working out the pulse of time, the output relay is turned off and start count time delay tpause. The cycle is repeated before removal of voltage.
Диаграмма работы реле времени № 9
 Cyclic relay with a single cycle. When the control contact starts count time delay tpause, after working time, pauses, the output relay is turned on and begins to count delay time tpulse, the output relay switches off after working pulse.
Диаграмма работы реле времени № 10  Cyclic relay with a single cycle. When the supply voltage, the output relay is turned on, count time delay tpulse is started after control contact closure, after working the output relay pulse time off and start count time delay tpause, after working time, pauses, the output relay is turned on.
 
CIRCUIT CONNECTION
Схема подключения РВЦ-1М
 Voltage supply AC230V is fed to the terminals "A1" and "A2", ACDC24V to terminals "+ A3" and "A2". Command of external control is supplied to the "Y1" terminal and is formed by closing a dry contact «S» between terminal "Y1" and terminal "A1" or "+ A3".
 
DIMENSIONS OF THE RELAY
Габариты 13*93*62 РВЦ-1М
 
Title
Order code
File to download
(manual)
File date
RVC-1M ACDC24V/АС230V UHL2
4640016936915
25.02.2016
RVC-1M ACDC24V/АС230V UHL4
4640016936908

 

English
You are reporting a typo in the following text:
Simply click the "Send typo report" button to complete the report. You can also include a comment.