Time relay cyclic RVC-P2-22 with 4 diagrams and launching outer into case 22mm!

Реле времени РВЦ-П2-22
RVC-P2-22 ACDC24V/АС230V UHL4
1850.00 руб. с НДС

 
  • Cyclic relay time with separate adjustment of pulse and pause times
  • Time delay range from 0,1s to 99h
  • Setting time delay by using two turning decade switches
  • 4 operation diagrams
  • 2 switching groups of contacts 5A/250V
  • The status indicator built-in relay, indicator of availability of power
  • Width of the case is 22mm
 
PURPOSE OF THE RELAY
 Time relay RVC-P2-22 is designed for switching electric circuits in a cyclic mode with preset time delay (pause and pulse).
 
DESIGN OF THE RELAY
 Relay is produced in a plastic case with a unified front connection wires power and switched circuits. Mounting is carried out on a DIN rail  width 35mm (GOST R IEC 60715-2003) or on a smooth surface. To set on a smooth surface, you need to push locks. Terminal design provides robust clamp wires up to 2,5mm2. On the front panel there are: button switch to set delay time pause tpause (set up values of tens 0-9 and units 0-9), button switch to set time pulse tpulse (set up values of tens 0-9 and units 0-9), green indicator turn on the power supply "U", yellow indicator actuation built-in executive relay «». On the side surface is located two DIP-switch to select the pause time range tpause and pulse time range tpulse (switches 1- 3) and the operation diagrams (switches 4).
 
OPERATION OF THE RELAY
 The relay has 8 sub-bands delay pause time and 8 sub-bands pulse delay time. The required delay pause (tpause) is determined by multiplying the numerical value set on switches "tens" and "units" pause on multiplier the selected range on the DIP-switch to choise time pause. Time delay tpulse is determined by multiplying the numerical value set on switches "tens" and "units" pulse on multiplier the selected range on the DIP-switch to choise time pulse.
 Operation diagram of relay is determined by the position "4" DIP-switches pause and pulse. Each switch has two zones for set. At DIP-switch pause zones are "A" and "B", at DIP-switch pulse zones are "C" and «D». Depending on the combination of set switch selects one of the four diagrams of the relay.
 
 WARNING:  Changing the operation diagrams and multipliers is possible only after removal of the voltage. Values on the switches "tens" and "units" can be changed when power is applied to the relay.
 In the currentless position the contacts 15-16 and 25-26 are closed. After the supplying voltage lights up green LED «U», relay begins to work the selected diagram, during the reference set time the green «U» indicator light flashes with a period of 0,5s. When the executive relay is turned on the yellow indicator «» lights up and contacts 15-16 and 25-26 opens, and contacts 25-28 closes.
 
SPECIFICATION OF THE RELAY RVC-P2-22
A parameter Unit RVC-P2-22
Supply voltage
V АСDC24±10%, AC230±10%
Range of the delays time pulse and pause   0,1-9,9s, 1-99s, 10-990s, 0,1-9,9min, 1-99min,  10-990min, 0,1-9,9h, 1-99h
Deviation of counting time delay, not more
%
2
Availability time, not more
s
0,15
Repeated availability time, not more
s
0,1
Exposure time control signal, not less
s
0,05
Operating diagrams   7, 8, 9 ,10
Maximum switching voltage В 400
Maximum switching current: AC250V 50Hz (AC1)/DC30V (DC1) A 5
Maximum switching power: АС250V 50Hz (АС1)/DC30V (DC1)
VA/W
1250/150
The maximum voltage between the power supply circuits and relay contacts
V
АС2000 (50Hz - 1min)
Power consumption, max
VA 2
Mechanical endurance, not less
cycles
10х106
Electrical endurance, not less
cycles
100000
Quantity and type of contacts   2 switching groups
Operating temperature range
0C
-10....+55
Storage temperature
0C
-40...+70
Immunity to interference from bursts in accordance with GOST R 51317.4.4-99 (IEC/EN 61000-4-4)   level 3 (2kV/5kHz)
Immunity to interference over voltage in accordance with GOST R 51317.4.5-99 (IEC/EN 61000-4-5)   уровень 3 (2кВ А1-А2-+А3)
Climatic modification and placement category by GOST 15150-69 (non-condensing)
  UHL4
The degree's protection at case/terminals according to by GOST 14254-96
  IP40/IP20
The degree of pollution in accordance with GOST 9920-89
  2
Relative humidity of air
%
up to 80 (at 250C)
Height above sea level
m
yill 2000
Operating position in space
 
artbitrary
Mode
 
round the clock
Dimensions
mm
22х93х62
Weight
kg
0,09
 
Диаграмма работы реле времени № 7
 Cyclical switching on and off the relay (infinite loop). When the supply voltage begins count delay time tpause, after working time, pauses, the output relay is turned on and begins count time delay tpulse, after working the output relay pulse time off. The cycle is repeated before removal of voltage.
Диаграмма работы реле времени № 8
 Cyclical switching on and off the relay (infinite loop). When the supply voltage, the output relay is turned on and begins count time delay tpulse, after working out the pulse of time, the output relay is turned off and start count time delay tpause. The cycle is repeated before removal of voltage.
Диаграмма работы реле времени № 9
 Cyclic relay with a single cycle. When the control contact starts count time delay tpause, after working time, pauses, the output relay is turned on and begins to count delay time tpulse, the output relay switches off after working pulse.
Диаграмма работы реле времени № 10
 Cyclic relay with a single cycle. When the supply voltage, the output relay is turned on, count time delay tpulse is started after control contact closure, after working the output relay pulse time off and start count time delay tpause, after working time, pauses, the output relay is turned on.
 
CIRCUIT CONNECTION
Схема подключения РВЦ-П2-22
 Voltage supply AC230V is fed to the terminals "A1" and "A2". Command of external control is supplied to the "Y1" terminal and is formed by closing a dry contact «S» between terminal "Y1" and terminal "+A1".
 
DIMENSIONS OF THE RELAY
Габариты 22*93*62
 
Title
Order code
File to download
(manual)
File date
RVC-P2-22 ACDC24V/АС230V UHL4 4640016936694   Download 25.02.2016

 

English
You are reporting a typo in the following text:
Simply click the "Send typo report" button to complete the report. You can also include a comment.