Time relay one switch in the ultra-slim 13mm case! RVO-1M

Реле времени однокомандное РВО-1М

RVO-1M ACDC24V/AC230V UHL4
1300.00 руб. с НДС

RVO-1M ACDC24V/AC230V UHL2
1430.00 руб. с НДС

 
  • Time delay range from 0,3s to 10h
  • Setting time delay by using one turning decade switches
  • 8 operation diagrams
  • 1 switching group 5A/250V
  • The status indicator built-in relay, indicator of availability of power
  • Width of the case is 13mm
 
PURPOSE OF THE RELAY
 Time relay RVO-1M designed to switching electric circuits with a preset time delay.
 
DESIGN OF THE RELAY
  Relay is produced in a plastic case with a unified front connection wires power and switched circuits. Mounting is carried out on a DIN rail  width 35mm (GOST R IEC 60715-2003) or on a smooth surface. To set on a smooth surface, you need to push locks. Terminal design provides robust clamp wires up to 2,5mm2. On the front panel there are: the turning switch time delay installation, built-in relay action yellow LED "", green LED of powering «U». On the side surface is located DIP-switch to select the time span (1, 2, 3 switches) and operation diagram (4, 5, 6 switches)
 
OPERATION OF THE RELAY
 The relay has 8 subbands time delay. The required delay is set the turning switch located on the front panel, based on the time range selected DIP-switch.  Operation diagram of the relay is set using DIP-switch.
 
 WARNING:  Changing the operation diagrams and multipliers is possible only after removal of the voltage.  
 
In the currentless position the contacts 15-16 are closed. After the supplying voltage lights up green LED «U», relay begins to work the selected diagram, during the reference set time the green «U» indicator light flashes. When the built-in relay is turned on the yellow LED lights «» and the contacts 15-18 are closed.
 
SPECIFICATION OF THE RELAY RVO-1M
A parameter Unit RVO-1M ACDC24V/AC230V
Supply voltage
V
АСDC24 ± 10%
АС230 ± 10%
Range of the delays time pulse and pauses
 
1-10s, 3-30s, 10-100s, 1-10min, 3-30min, 10-100min, 1-10h, 3-30h
Deviation of installation time delay, not more
%
10
Deviation of counting time delay, not more
%
2
Availability time, not more
s
0,15
Repeated availability time, not more
s
0,1
Exposure time control signal, no less s 0,05
Operating diagrams
 
1, 2, 4, 12, 13, 24, 28, 29
Maximum switching current: AC250V 50Hz (AC1)/DC30V (DC1)
A
5
Maximum switching voltage
V
400
Maximum switching power: АС250V 50Hz (АС1)/DC30V (DC1)
VA/W
1250/150
The maximum voltage between the power supply circuits and relay contacts
V
AC2000 (50Hz - 1min)
Power consumption, max
VA
2
Mechanical endurance, not less
cycles
10х106
Electrical endurance, not less
cycles
100000
Quantity and type of contacts
 
1 switching group
Operating temperature range (different versions)
0C
-25…+55 (UHL4)
 -40…+55 (UHL2)
Storage temperature
0C
-40...+70
Immunity to interference from bursts in accordance with GOST R 51317.4.4-99 (IEC/EN 61000-4-4)
 
level 3 (2kV/5kHz)
Immunity to interference over voltage in accordance with GOST R 51317.4.5-99 (IEC/EN 61000-4-5)
 
level 3 (2kV А1-А2)
Climatic modification and placement category by GOST 15150-69 (non-condensing)
 
UHL4 or UHL2
The degree's protection at case/terminals according to by GOST 14254-96
 
IP40/IP20
The degree of pollution in accordance with GOST 9920-89
 
2
Relative humidity of air
%
80 (at 250C)
Height above sea level
m
till 2000
Operating position in space
 
artbitrary
Mode
 
round the clock
Dimensions
mm
13х93х62
Weight
kg
0,065
 
DIAGRAMS OF OPERATING THE RELAY
Диаграмма работы реле времени № 1
 The counting the set time begins when power is applied, after which the relay switches (switch-on delay). It is turned off, when the power is off.
Диаграмма работы реле времени № 2
 The relay is turned on simultaneously with power supply. Disabling the relay occurs after the set time counting (tripping delay).
Диаграмма работы реле времени № 4
 The relay turn on when the control contact is closed. The counting begins the set time after switching off of control contact. The counting time is not interrupted by repeated external start command. Disabling the relay occurs after the set readout time or at power is turned off.
Диаграмма работы реле времени № 12
  The relay is activated when the control contact is closed. The counting begins the set time after opening of control contact. Time counting is interrupted by command of external re-start. Disabling the switch occurs after a predetermined reference time or when power is turned off.
Диаграмма работы реле времени № 13  When control signal (leading edge) is supplied, is changed  the position of the contact group.
Диаграмма работы реле времени № 24
 When the control contact is closed a relay switches on and begins count a predetermined time delay. Time counting is interrupted by command of external re-start. The relay switches off, if the interval between external start commands more than the set delay time. The relay is turned on at admission the next command from external start.
Диаграмма работы реле времени № 28
 Control of frequency or speed. The counting of delay time starts when the supply voltage on the front or back front of the control pulse; relay is turned on, if the interval between any adjacent fronts of greater set delay time or duration of the control pulse longer set time delay. A disconnection of the relay and the beginning a new cycle begins with the giving of the next driving pulse.
Диаграмма работы реле времени № 29
 Control of frequency or speed. The counting of delay time starts when the supply voltage on the front or back front of the control pulse; relay is turned on, if the interval between any adjacent fronts of greater set delay time or duration of the control pulse longer set time delay. A disconnection of the relay begins only when removing the supply voltage (the memory mode).
 
CIRCUIT CONNECTION
Схема подключения РВО-1М
Voltage supply AC230V is fed to the terminals "A1" and "A2", ACDC24V to terminals "+ A3" and "A2". Command of external control is supplied to the "Y1" terminal and is formed by closing a dry contact «S» between terminal "Y1" and terminal "A1" or "+ A3".
 
DIMENSIONS OF THE RELAY
 Габариты 13*93*62
 
Title
Order code
File to download
(manual)
File date
RVO-1M АСDC24V/АС230V UHL4
4640016936885
Download
v10.09.2015
RVO-1M ACDC24V/АС230V UHL2
4640016936892
English
You are reporting a typo in the following text:
Simply click the "Send typo report" button to complete the report. You can also include a comment.